Changelog create_ap v0.4:
+ All codescripting bug fixes.
create_ap v0.4
create_ap is a script for creates a NATed or Bridged WiFi Access Point.
Features
* Create an AP (Access Point) at any channel.
* Choose one of the following encryptions: WPA, WPA2, WPA/WPA2, Open (no encryption).
* Hide your SSID.
* Disable communication between clients (client isolation).
* IEEE 802.11n & 802.11ac support
* Internet sharing methods: NATed or Bridged or None (no Internet sharing).
* Choose the AP Gateway IP (only for ‘NATed’ and ‘None’ Internet sharing methods).
* You can create an AP with the same interface you are getting your Internet connection.
* You can pass your SSID and password through pipe or through arguments (see examples).
create_ap v0.3
Dependencies
General
+ bash (to run this script)
+ util-linux (for getopt)
+ procps or procps-ng
+ hostapd
+ iproute2
+ iw
+ iwconfig (you only need this if ‘iw’ can not recognize your adapter)
+ haveged (optional)
For ‘NATed’ or ‘None’ Internet sharing method
– dnsmasq
– iptables
Example Use & Download from git:
git clone https://github.com/oblique/create_ap && cd create_ap make install ArchLinux: yaourt -S create_ap Gentoo: emerge layman layman -f -a jorgicio emerge net-wireless/create_ap Examples No passphrase (open network): create_ap wlan0 eth0 MyAccessPoint WPA + WPA2 passphrase: create_ap wlan0 eth0 MyAccessPoint MyPassPhrase AP without Internet sharing: create_ap -n wlan0 MyAccessPoint MyPassPhrase Bridged Internet sharing: create_ap -m bridge wlan0 eth0 MyAccessPoint MyPassPhrase Bridged Internet sharing (pre-configured bridge interface): create_ap -m bridge wlan0 br0 MyAccessPoint MyPassPhrase Internet sharing from the same WiFi interface: create_ap wlan0 wlan0 MyAccessPoint MyPassPhrase Choose a different WiFi adapter driver create_ap --driver rtl871xdrv wlan0 eth0 MyAccessPoint MyPassPhrase No passphrase (open network) using pipe: echo -e "MyAccessPoint" | create_ap wlan0 eth0 WPA + WPA2 passphrase using pipe: echo -e "MyAccessPoint\nMyPassPhrase" | create_ap wlan0 eth0 Enable IEEE 802.11n create_ap --ieee80211n --ht_capab '[HT40+]' wlan0 eth0 MyAccessPoint MyPassPhrase Client Isolation: create_ap --isolate-clients wlan0 eth0 MyAccessPoint MyPassPhrase
Download: v0.4.zip | v0.4.tar.gz
Source: https://github.com/oblique | Our Post Before
